Speaker
Description
The origin of ultra-high-energy cosmic rays (UHECRs) remains an open question, and next-generation observatories such as the Global Cosmic-Ray Observatory (GCOS) will require a substantially larger exposure while retaining sensitivity to the mass composition of primary cosmic rays. CRAFFT (Cosmic Ray Air Fluorescence Fresnel-lens Telescope) is a low-cost, low-pixel-count fluorescence telescope developed for this purpose. Its simple Fresnel-lens-based optical system is designed to be portable and easy to deploy and relocate, while fully autonomous operation with an independent power supply is being developed to enable large-scale deployment with minimal infrastructure.
To further reduce the cost per field of view, we are developing a new focal-plane optical system using photomultiplier tubes (PMTs) previously employed in the Telescope Array fluorescence detectors. Each PMT is coupled to a Winston-cone light guide, which increases the effective light-collection area by approximately a factor of two while providing a field of view of about (4^\circ) per pixel. The light guides are fabricated by 3D printing using carbon-filled filament, allowing inexpensive, reproducible, and mechanically robust production suitable for a large number of detector units.
In this contribution, we present the optical design of the upgraded CRAFFT focal plane, the design and fabrication method of the Winston-cone light guides, and the current status of their performance evaluation. We also discuss the prospects of this optical configuration for a low-cost and scalable fluorescence-detector array toward GCOS.